GB PVC FITTING CLIP
When the pvc pipe clamp is installed, the bolt is fixed on the wall first, and then the pipe clamp and the bolt are tightened, so that the PVC pipe can be wrapped in a ring to fix the pipe. If the pipe jam is loose, the pipe will be unreliable and the pipe without the pipe jam will fall off.
Product performance characteristics:
1. Light weight, easy handling and handling: PVC pipe and fitting material is very light, easy to handle and construct, which can save labor.
2. Good chemical resistance: PVC pipe and fitting fitting has friendly acid, alkali and corrosion resistance, which is suitable for chemical industry.
3. Fluid resistance is small: the wall of PVC pipe and fitting is smooth, and the resistance to fluid is small. Its roughness coefficient is only 0.009, which is lower than other pipes. Under the same flow rate, the pipe diameter can be reduced.
4. Strong mechanical strength: PVC pipe and fitting has good water pressure strength, external pressure strength, impact strength and so on. It is suitable for piping engineering under various conditions.
5. Excellent electrical insulation: PVC pipe and fitting has excellent electrical insulation, which is suitable for conducting wires and cables, and distributing pipes with wires in buildings.
6. Do not affect water quality:PVC pipe and fitting proved by dissolution test do not affect water quality and are the best pipes for tap water distribution at present.
7. The construction is simple; the joining construction of PVC pipe and fitting is quick and easy, so the construction cost is low.
Applicable occasions:
Tap water engineering, electrical engineering, construction engineering, sewer engineering, telecommunication engineering, well sinking engineering, brine engineering, natural gas engineering, chemical plant, paper-making engineering, brewing and fermentation factory, electroplating factory, agricultural garden, mine, aquaculture industry, highway engineering, golf course engineering, fishery plastic raft
1 Material:PVC
2 COLOR:any color
3 SIZE:20-250MM etc
4 STANDARD:ASTM,SCH40
5 MADE IN CHINA
6 BRAND:OEM
没有评论:
发表评论