How to connect the broken PVC pipe

We often encounter the phenomenon that the installed PVC sewage pipe is damaged in the middle. Because the bad part is in the middle, and the two ends cannot move, we have to dig it again according to the previous method. The pvc pipe manufacturer will introduce a method to you.

Tools and materials we need to prepare: hacksaw, hand hammer, PVC drain pipe, pipe hoop, PVC glue;

  1. Damaged PVC drainage pipe in the middle, both ends of the hole are intact;
How to connect the broken PVC pipe

How to connect the broken PVC pipe

2.Use a hacksaw to cut off the part with the hole in the middle of the pvc pipe;

sawing pvc pipe

sawing pvc pipe

3.Use a hacksaw to cut off the dividing line in the middle of the pvc coupling

pvc coupling

pvc coupling

4.Put the PVC coupling without a dividing line in the middle of the two ends of the PVC pipe that was just sawn off;

 

pvc couling join

pvc couling join

5. Saw a piece of PVC short pipe of the same specification, so that the length is equal to the size of the middle gap, and the two ends of the middle PVC short pipe are marked with about 1/2 the width of the PVC coupling;

mark pvc coupling

mark pvc coupling

6.After applying the special PVC glue on both sides of the two gaps, tap the two PVC coupling with a hammer to the position of the marked line in the direction of the arrow;

pvc coupling and pvc pipe

pvc coupling and pvc pipe

7. According to the above method, the entire PVC takeover can be easily completed

PVC pipe take over

PVC pipe take over