what is pvc faucet

 what is pvc faucet

Faucet is a popular name for water valves. It is used to control the flow of water. It is a must in family life and an indispensable part of every family.

pvc faucet

We are a professional PVC faucets manufacturer. The faucets we produce have the characteristics of rich colors, beautiful appearance, anti-aging, corrosion resistance, high-pressure resistance, non-toxic and tasteless.

The PVC faucet we produce is frost-resistant, frost-resistant, and low-temperature resistant. It adopts a double water nozzle design, opens and disassembles, thickens the pipe wall, and is non-slip and easy to screw. We can customize PVC faucets and OEM PVC faucets for you according to your requirements.

Wide range of uses: construction, industry, agriculture, chemical industry, and other industries, as well as household kitchens, bathrooms, balconies, etc.

plastic faucet

Advantages of plastic faucet:

1. The plastic faucet has rich shapes and colors, which are very decorative and practical.
2. Plastic faucets have excellent chemical properties and electrical insulation properties, good heat resistance, no deformation, and no scratches.
3. The plastic faucet has good impact resistance and dimensional stability and is non-toxic, tasteless, environmentally friendly, and healthy.
4. Plastic faucets are tough, have low water absorption, are corrosion-resistant, are easy to install, and are durable.

Plastic faucet cleaning and maintenance

1. Wipe the surface of the faucet with a dry soft cotton cloth, do not wipe it directly with a wet towel, and do not wipe the faucet with burrs.
2. To prevent the faucet from touching the acid-base liquid, you can spray a neutral detergent on a soft cloth and then gently wipe the faucet.

Maintenance of plastic faucet

1. Usually, you can spray car wax on the surface of the faucet for 3-5 minutes and wipe it to keep the brightness of the faucet sample.

2. It is best not to touch it directly with your hands at ordinary times because the oil on your hands can easily get on the surface of the faucet, which is not easy to clean and affects the finish.

Winter antifreeze maintenance:

1 Insulation and cold protection

For PVC pipes, water meters, and PVC faucets exposed outdoors, heat preservation measures are taken, and they are wrapped in cotton or plastic foam to play a role in heat preservation.

2 Close doors and windows

Don’t think that indoor water equipment will not be frozen, and the outdoor temperature is low at night. Remember to close the doors and windows of the kitchen, toilet, etc. before going to bed.

3 Close the water valve

After closing the water valve at night or when not in use, turn on the faucet to drain the water in the pipe, which can effectively prevent freezing

If you need plastic faucet, pvc faucet, please contact me.

Email id :david@pvcpipefitting.com

whatsapp:008615533994368

https://www.pvcpipefitting.com/what-is-pvc-faucet/

How to weld large diameter PPR pipe?

 

How to weld large diameter PPR pipe?

In plumbing engineering, we often use PPR pipes and fittings, so how to weld large-diameter PPR pipes? The pipeline contractor is also very confused, let’s explain.

Generally, PPR pipes with diameters below D63 (including D63) are connected by socket hot melt; D75-D160 PPR pipes can be connected by socket hot melt or butt hot melt welding.Large-diameter PPR pipes are generally used for butt welding ppr pipe.

Large diameter socket fuser

Large diameter butt fusion device

The butt welding process of large-diameter PPR pipes is a construction process in which the section of two PPR pipes is heated to 260±10℃, and then enough force is applied to butt weld the two PPR pipes together. The melt at the butt joint is fully fused, and the tensile strength and pressure of the welded part are equal to or stronger than that of the PPR pipe itself.

ppr pipe

Operation steps for butt welding of large-diameter PPR pipes:

1. Fix the PPR pipe that needs butt welding

Use the clamp on the welding machine to fix the part that needs to be connected. Check whether the end face is aligned and adjusted to the best position.

Put the ppr pipe to be welded and adjust

2. Milling the end face of PPR pipe

Put in the port milling cutter and correct the port plane until continuous chips are formed. Take out the milling cutter and adjust again to check the coaxiality. The end face of the pipe must be milled clean and flat. This operation can provide a well-milled end surface that is perpendicular to the centerline of the end surface of each pipe and has no defects.

Milling the end face of PPR pipe

3. Align the end faces of the PPR pipe

Use a clean new lint-free cotton cloth to remove sawdust and other debris generated when milling the plane. The end faces of the pipe must be rounded and aligned with each other to minimize the mismatch of the pipe wall (high-low). This can be achieved by adjusting the clamp to match the outer diameter of the end surface of the pipe. In order to prevent the pipe sliding clip during butt welding, it must be clamped.

Align the ends of the PPR pipe

4. Melting and heating butt surface

Turn on the power to make the surface temperature of the heating plate reach the required temperature range of 250-280°C). Install a heater on the welding machine so that the end surface of the PPR pipe is in full contact with the heater surface. It must be ensured that the end surface of the pipe is in full and proper contact with the heater surface, and that it is just in contact with the appropriate force. This force is very short-lived, and the contact cannot be interrupted while the force is weakened. Continue to properly maintain the heated part under the action of no force until there is a melted edge between the heater and the end surface of the pipe.

Fusion heating butt surface

5. Connect the two fused butt surfaces to each other

After the end surface of the pipe is heated for a certain period of time, remove the heater and butt the two molten end surfaces with sufficient force to form two curls on the inside and outside of the pipe wall. Quickly close the fixture, close the PPR tube to be welded, and increase the pressure steadily.

Bring the two fused butt surfaces to each other

6. Maintain a constant docking pressure

Under the action of force, the melted end faces cannot move after the butt joint is completed until they are sufficiently cooled to produce an inseparable force. In order to obtain high-quality welds, there is a proper time for the welds to be cooled under the action of force before the clamps on the welding machine are opened. The heat-melt butt welding pressure of the two butt ends shall be kept until the crimping surface of the butt joint is cooled. The pipe can be dragged, installed or treated with force after it is completely cooled. After maintaining the pressure and cooling down, the pressure is reduced to zero, and then the pipe is taken out, and the welding is completed.

Maintain a constant docking pressure

We are a professional PPR pipes and fittings manufacturer. If you need PPR pipes and fittings for plumbing engineering, please contact me, we will provide the most favorable quotation and the best quality products.

https://www.pvcpipefitting.com/how-to-weld-large-diameter-ppr-pipe/

Is the heavier the PPR fittings the better?

 

Is the heavier the PPR fittings the better?

PPR Pipe fittings such as PPR elbows or PPR tees are generally divided into all-plastic pipe fittings and copper embedded pipe fittings, so we will discuss the weight of the twoPPR pipe fittings separately.

First of all, whether it is all-plastic PPR pipe fittings or copper-inlaid pipe fittings, the PPR raw materials are used in the plastic part. The density of pure PPR raw materials is between 0.89g/cm³ -0.91g/cm³ . There are different PPR pipe brands and manufacturers due to mold design. Different, there are generally differences in individual size and weight.

Secondly, in addition to the PPR material, what determines the weight of copper-embedded PPR pipe fittings is the copper label and weight. The copper inserts of the PPR pipe fittings we produce are made of HPB62 high-precision brass one-time forging, 4 layers, and 8 processes are used. The material is very elegant, our ppr pipe fittings are obviously heavier than the PPR pipe fittings produced by other factories, and more importantly, the main component of the weight of the pipe fittings we produce is copper. We all know that the price of copper material is 5-7 of the price of PPR material Therefore, our ppr fittings have better quality and better materials.

 

ppr fitting elbow copper

other ppr fitting elbow copper

inner wire elbow

What if PPR pipe fittings are produced from non-PPR raw materials, or if they are produced from non-pure materials? How to simply identify it?

It is difficult to judge whether the PPR pipe material is pure from the appearance or weight alone. The simple reference method is: ignite the pure PPR pipe fittings, which are not black and odorless, and can pull out a long round wire. If it burns, it will turn black. If there is a peculiar smell, and the long round wire cannot be pulled out, or the flat wire is pulled out, it means that the raw materials used in the PPR pipe fittings may be impure.

Generally speaking, if the PPR pipe fittings produced with pure raw materials are heavy, it means that more raw materials are used, and the safety of hot-melt welding is better. This is because the PPR pipe national standard for pipe fittings is mainly the socket standard There is no fixed standard for the individual size and weight of pipe fittings. The high-end home improvement PPR pipe brand represented by cleanliness pipes, in order to ensure that higher quality products are provided to users, are both in the design and size of PPR pipe fittings. Adhering to the consistent principle of transcending the national standard. However, the situation of PPR pipes is different. The length, wall thickness, and inner and outer diameters of PPR pipes have strict standards. Therefore, it can be said that if the weight of PPR pipes produced according to the standards is heavier, it may indicate that there are impurities in the pipes and other non-PPR raw materials, which may be more weight. There will be problems with heavy ones.

https://www.pvcpipefitting.com/is-the-heavier-the-ppr-fittings-the-better/

How to deal with the burst of PVC pipe fittings

 

How to deal with the burst of PVC pipe fittings

PVC pipes can be seen everywhere in life, mainly because they are relatively light and easy to install and repair. Even if the household pipe is broken, you can repair it yourself. So what should I do if the PVC pipe fittings burst?

Treatment method after bursting of PVC pipe fittings:

1. The number of leaks after the water pipe bursts is generally directly related to the water pressure in the pipe. Regardless of whether the water is dripping or gushing out, what you should do at this time is to immediately close the valve of the water supply pipe and report to the local property department for repair.

2. Bundle the damaged part of the water pipe with the special tape for repairing the water pipe.

3. In addition, it is also possible to repair cracks in water pipes with glass fiber tape or ring air resin adhesive.

4. If the water pipe burst is serious, you can wrap the broken part of the water pipe with a towel, which can prevent the water from radiating everywhere, and can also introduce the water into the placed bucket, so that the PVC pipe manufacturer will avoid huge waste. At the same time, the valve of the main water pipe in the household can be closed, and the tap water supply in the house can be completely intercepted.

5. If the cause of the pipe burst is that the pipe is too old, you should find a plumber to stop the inspection and repair it in time.

PVC drainage pipe

Causes of PVC pipe burst

1. The purchased PVC pipes are inferior quality pipes and contain recycled materials. This kind of pipe is prone to bursting after being used for a period of time.

2. The PVC pipe cannot meet the design pressure requirement. When the water supply pressure is too high, the pipe burst, the drum breaks, and the bag pick up.

3. The PVC pipe is too long and the expansion joint is not used, resulting in excessive thermal expansion, pipe bursting, drum braking, and bag lifting.

When purchasing PVC pipes, you must purchase qualified products according to the purpose of use, and install them in strict accordance with the procedures during installation, so that there will be no pipe bursts, drums, and packages.

https://www.pvcpipefitting.com/how-to-deal-with-the-burst-of-pvc-pipe-fittings/